FPGA/SoC Board Bring-Up - QSPI (Zynq Part 3) - Phil's Lab #98
How to configure the QSPI Flash memory interface and create first-stage bootloader (FSBL) to automatically program a Xilinx/AMD Zynq system-on-chip on custom hardware. Schematic and hardware walkthrough, Vivado and Vitis configuration, and test.
Chapters:
- 00:00Introduction
- 00:51Previous Videos
- 01:30Schematic
- 02:45Memory Choice (UG908)
- 03:53PCB & Bootmode Pins
- 04:58First-Stage Boot Loader (FSBL) Overview
- 05:39Vivado Set-Up
- 06:57Vitis FSBL & Boot Image
- 07:49Vitis Hello World Application & Boot Image
- 09:14Hardware Connection
- 09:53Program Flash
- 11:44Bootmode Selection (QSPI)
- 12:17UART Hello World Test
- 12:26Summary & What´s Next
- 13:08Outro
