FEDEVEL
Platform forum

Modjo , 11-16-2018, 01:36 PM

Hi, in video 7 i have a problem with the component clearence constraint . I have configured rules like in the video (i think) but i have 2 errors with J2 and MH2 / SCKT and U1, see picture Under :

robertferanec , 11-20-2018, 02:10 AM

Can you attach screenshot from "PCB Rules and Violations" Panel? I would like to see what exactly it says.

Modjo , 11-26-2018, 06:14 AM

Sorry for the delay in my answer, under the picrures asked :

robertferanec , 11-26-2018, 09:09 AM

The violation says, the components are 0.03mm from each other and should be at least 0.2mm. So, the exception doesn't work for them (is not correctly set)?

Modjo , 11-28-2018, 02:11 AM

Sorry for the delay in my answer but last two days the web site didn't working good for me. See under the picture of the rule that i created that didn't work ...

robertferanec , 11-29-2018, 10:46 AM

Hmm, it looks like the rule is set correctly. I am not sure what is happening. Try double click on the error inside of the "PCB Rules and Violations" - that should show you exactly where the error is. Maybe it will help?

Modjo , 11-29-2018, 01:06 PM

It like the rule isn't take in consideration ...

robertferanec , 11-29-2018, 02:01 PM

Please, send me the project (delete history directory). I will have a look.

Modjo , 11-29-2018, 02:20 PM

Ok, i just send you it by email

robertferanec , 12-01-2018, 03:05 AM

You need to increase priority of the rule, then it will work ok:

Modjo , 12-01-2018, 05:34 AM

Thanks a lot it work fine now ! Not evident to change priority in the rules ...