FEDEVEL
Platform forum

cancan , 03-22-2021, 09:22 AM

Is there anyone who has worked with the Signal Distribution Board (PCB) with using Beckhoff modules or any kind of EtherCAT modules in PCB?

Here is what I need to draw; https://www.beckhoff.com/en-us/produ...ibution-board/

I need some examples and the way where can I start drawing.

I only worked on simple PCB. I am not an expert on that. So please any comments could be useful for me.

Let me know if you need more details and please feel free to contact me.

Kind regards,

robertferanec , 03-27-2021, 03:46 AM

I have never used that. Maybe someone else can help?

qdrives , 04-01-2021, 09:17 AM

Have you looked at the design guide?
Have you ever build a modular IO system? (Fieldbus bus coupler and IO modules)
From the little I looked at it, it is meant to be a PCB where such IO modules are mounted on. Here the signals go to the PCB instead of connectors. You can add additional circuits and use you own connectors (i.e. combining power, digital and analog IO)
Often it is easier if you physically have a few of the modules prior to designing the board.