USE DISCOUNT CODEEXPERT30TO SAVE $30 USD
Design Rule Check problem!
JohnsonMiller , 01-03-2017, 02:22 PM
Hi Guys,
In a design with AD17, when I ask to check design rules, Altium start to consume all CPU power and lock with a message on status bar, as shown in figure.
Do you have any idea what is issue?
I have checked another design, it works with no problem!
In a design with AD17, when I ask to check design rules, Altium start to consume all CPU power and lock with a message on status bar, as shown in figure.
Do you have any idea what is issue?
I have checked another design, it works with no problem!
robertferanec , 01-04-2017, 06:43 PM
So, maybe it is a problem related to the project? I would try to delete all the polygons and if it then works, I would maybe try to identify which of the polygons is wrong and redraw it. Possibly I would just delete part of the design and try to locate what is causing the problem.
JohnsonMiller , 01-05-2017, 10:56 AM
Hi,
I did remove the polygon, but issue was there. Then I unroute the board, suddenly it is gone.
BR,
I did remove the polygon, but issue was there. Then I unroute the board, suddenly it is gone.
BR,
robertferanec , 01-06-2017, 11:13 AM
Perfect. Now just try to locate the wrong connection 
It should be fixable.
It should be fixable.Use our interactive Discord forum to reply or ask new questions.