USE DISCOUNT CODEEXPERT30TO SAVE $30 USD
Stuck with the execution of Jasbir's filesystem on OpenRex Quad
imsaditya , 05-30-2018, 07:06 AM
After going through the course on essentials on uboot, linux and yocto and parallel development of openrex board, I've encountered a difficulty over past few days.
The yocto images for openrex quad were successfully compiled and running on the board but on adding the filesystem by Jasbir, the serial teminal is stuck.
The terminal shows, Starting kernel....
Kindly help me out as soon as possible.
The yocto images for openrex quad were successfully compiled and running on the board but on adding the filesystem by Jasbir, the serial teminal is stuck.
The terminal shows, Starting kernel....
Kindly help me out as soon as possible.
robertferanec , 05-30-2018, 08:01 AM
Did you go through the section called "Important for Jasbir's filesystem!" on the page here: http://www.imx6rex.com/open-rex/soft...system/#copied
PS: If you only see "Starting kernel" message, this doesn't look like file system related problem, maybe rather problem in uBoot settings (environmental variables) or possibly problem with kernel itself. File system is activated far away from "Starting kernel" message.
PS: If you only see "Starting kernel" message, this doesn't look like file system related problem, maybe rather problem in uBoot settings (environmental variables) or possibly problem with kernel itself. File system is activated far away from "Starting kernel" message.
Use our interactive Discord forum to reply or ask new questions.