USE DISCOUNT CODEEXPERT30TO SAVE $30 USD
Return Current Path For USB Lines
amirsaeed , 08-23-2020, 11:53 PM
Hello Guys,
I'm Designing my first 4 Layer PCB and had a issue with return current path of my USB lines on Bottom Layer.
my stack-up is like this:
TOP Signal
Prepreg---------0.1mm
GND
Core-------------1.265mm
Power
Pregreg---------0.1mm
BOT Signal
So I cut the Power Plane and draw a GND polygon under USB and other signals.
Is this a right thing to do or I better stitch power and GND with 100nf caps near every Via?
Thank you for your time.
I'm Designing my first 4 Layer PCB and had a issue with return current path of my USB lines on Bottom Layer.
my stack-up is like this:
TOP Signal
Prepreg---------0.1mm
GND
Core-------------1.265mm
Power
Pregreg---------0.1mm
BOT Signal
So I cut the Power Plane and draw a GND polygon under USB and other signals.
Is this a right thing to do or I better stitch power and GND with 100nf caps near every Via?
Thank you for your time.
robertferanec , 08-24-2020, 08:49 AM
It looks ok to me.
amirsaeed , 08-24-2020, 09:57 AM
Thank you. 😁
Use our interactive Discord forum to reply or ask new questions.