USE DISCOUNT CODEEXPERT30TO SAVE $30 USD
Placing D Connecter at Edge of PDB
Vikrant , 08-23-2022, 01:52 AM
I am unable to put D connector at the PCB edge please help!!
robertferanec , 08-24-2022, 02:05 AM
Hmm, I don't really know what the problem could be. Just to be sure, can you move anything else over the edge? I am thinking if the board is not at the edge of the canvas.
qdrives , 08-29-2022, 02:18 PM
The board is positioned at or near the absolute zero position (in X and/or Y axis)
Best solution:
- Optionally: make sure you have primitives to define the board shape -> Design / Board shape / create primitives from board shape.
- enable all layers
- In properties make sure everything can be selected
- select everything Ctrl-A
- Edit / Move / Move selection by X, Y
- For the X and Y offsets use 50mm or 2000mil
- Click Ok
- Place the origin at the new position -> Edit / Origin / Set
Best solution:
- Optionally: make sure you have primitives to define the board shape -> Design / Board shape / create primitives from board shape.
- enable all layers
- In properties make sure everything can be selected
- select everything Ctrl-A
- Edit / Move / Move selection by X, Y
- For the X and Y offsets use 50mm or 2000mil
- Click Ok
- Place the origin at the new position -> Edit / Origin / Set
Use our interactive Discord forum to reply or ask new questions.